Drip Accessories

We are manufacturing Different types of Drip Accessories in Ahmedabad

What is Drip Irrigation?

Drip irrigation is a system designed to deliver water and nutrients to crops in the most efficient manner. The system essentially applies water and nutrients directly to the root zone of the plants to improve effectiveness. Thus, drip irrigation is the most advanced technology available to farmer for achieving higher yield in the context of limited resources.

At PAYAL, our aim has always been to design the best quality drip irrigation systems and make them affordable for farmers. Our driplines are manufactured using latest technology and use highly precise drippers to ensure the optimum flow rate for your crops.

How does Drip Irrigation work?

Drip Irrigation is considered to be a sort of micro-irrigation method that is introduced to prevent water wastage and save nutrients. Drip irrigation systems consists of a network of “driplines” which are arranged along the rows of crops. The main idea is to flow water directly towards the roots and minimize the amount of water evaporation.

Benefits of Drip Irrigation

Drip irrigation is the only technology which addresses the problems simultaneously and ensure the maximum cost saving in types of labour, energy, water for farmers. 

  • High water application efficiency
  • Efficient use of fertilizer/nutrient due to localized application and reduced leaching
  • Labour cost is less
  • Usually operated at a lower pressure than other types of pressurized irrigation, reducing energy costs.
  • Increased land utilization – ability to irrigate irregular shaped fields
  • Moisture within the root zone can be maintained at field capacity
  • Soil type plays less important role in frequency of irrigation

Jain Type Grommets

We are manufacturer, supplier and exporter of finest quality of rubber grommets using latest innovative technology. The Grommet is a polymer insert designed to fit in devices to provide a flexible friction interface between the device and a connector. This minimizes any unplanned movement and so optimizes the configuration. Used to connect PVC sub main to plain lateral by using take off.

In Jain type Grommet size is available in 12 mm, 16mm, 22 mm.

Drip Accessories - JAIN TYPE GROMMET

Netafim Type Grommet

Netafim type grommet shape is top hat grommet type. Grommet is probably the smallest still most important accessory of your drip irrigation system. It is a junction between rigid PVC pipe and flexible polyethylene tube or dripline. Converging inside walls pushed against the pipe hole surface to provide leak proof sealing.

In Netafim type Grommet size is available in 16mm.

Drip Accessories - Netafim Type Grommet

Close Grommet

Generally, the close grommet are used to stop or close hole in pvc pipe which holes are 12mm , 16mm , 20mm.To plug the unwanted holes on submain. Converging inside walls pushed against the pipe hole surface to provide leak proof sealing.

In Close Grommet size is available in 12mm , 16mm , 20mm.

Drip Accessories - CLOSE GROMMENT

Drip Emitters / Online Dripper

We are manufacturer, supplier and exporter of finest quality of Drip Emitters using latest innovative technology. Also, the Drip Emitter known as Drip Drippers and Online Drippers. Drip drippers are easy to install directly into the drip irrigation pipe/literal pipe. Online dripper are ensuring a constant flow of water in each dripper/emitter. Drip Dripper’s fixedflow ration is 2 Ltr, 4 Ltr, 8 Ltr and 14 Ltr.

Drip Accessories - Drip Emitters Online Dripper

Adjustable Dripper / Irrigation Drippers

We are manufacturer, supplier and exporter of finest quality of irrigation Dripper Or Adjustable Dripper using latest innovative technology. The adjustable stream drip emitters have a rotating cap that allows for simultaneous control of the flow and the wetted area. As per your requirement you can increase or decrease the flow of water. these adjustable drip emitters offer a convenient way to water areas where conventional sprinkler systems are not practical.

Drip Accessories Adjustable Dripper

Dripper Dummy Plug

We are one of the manufacturer of Dripper Dummy plug. We are engaged in providing a quality array of lateral cock to the esteemed customers. The mainly use of a drip dummy plug is to close the unwanted holes in drip pipe.

Drip Accessories dripper dummy plug

Drip Joiner

We are manufacturing and supplying high retention in low pressure poly tubing for long term reliability of connections. these can be confidently installed without clamps when matched with quality low pressure poly tubing with corresponding dimension’s. operating pressures should not exceed 300 kpa.

In drip joiner the size is available in 12 mm, 16 mm, 20 mm.

Drip Accessories - Drip joiner

Drip Reducer Joiner

We are manufacturing and supplying high retention in low pressure poly tubing for long term reliability of connections. The main use of drip reducer joiner is to connect big diameter to small diameter.

Available size in Drip Reducer joiner is 16 x 12, 20 x 16.

Drip Accessories - DRIP REDUCER JOINER

Ring Joiners

Leveraging upon our technologically-advanced production facility, we offer a supreme grade variety of 16mm Ring Joiner which is made available in various specifications. Under the strict guidance of our experts, these products are manufactured using quality assured raw material & cutting edge technology.

Drip Accessories - RING JOINER

Drip Take Off

Take off System is highly durable in nature and easy to use. These fittings are used while compiling the drip irrigation system. They are a great option for connecting low pressure irrigation tubing and drip lines to polyethylene tubes or PVC pipe. Use of capo rubber grommets and correct drill bit is necessary for leak-proof installation.

Available size in drip tack off is 12mm, 16mm, 20mm.

Drip Accessories - DRIP TACK OFF

Drip End Cap

We providing a supreme quality gamut of Drip End Cap are approved spectrum of 12mm, 16mm and 20mm Drip Lateral End Cap. They are used to close the lateral ends; Submain ends or mainline ends.

Available size in drip tack off is 12mm, 16mm, 20mm.

Drip Accessories - DRIPP END CAP

Drip Elbow

We are manufacturing and supplying high retention in low pressure poly tubing for long term reliability of connections. The Drip Elbow for turning a 90 degree to connect another pipe. these can be confidently installed without clamps when matched with quality low pressure poly tubing with corresponding dimensions. operating pressures should not exceed 300 kpa.

In Drip Elbow the size is available in 12 mm, 16 mm, 20 mm.

Drip Accessories - DRIP ELBOW

Drip Tee

We are manufacturing and supplying high retention in low pressure poly tubing for long term reliability of connections. The Drip Tee for using a one connection to other 2 connection. These can be confidently installed without clamps when matched with quality low pressure poly tubing with corresponding dimensions.

In Drip Tee the size is available in 12 mm, 16 mm, 20 mm.

Drip Accessories - drip tee

Drip Y Tee

We are one of the leading manufacturer of 16mm Y tee available in 16mm. The Drip Y Tee is used while connecting pipes in a system to ensure leak proof supply of water in drip irrigation system. The Y Tee are available in same Size and Reducing size.

In Drip Y Tee the size is available in 16x16x16 , 16x12x12 , 20x20x20.

Drip Accessories 20 MM Y TEE 1

Drip lateral cock

We are one of the best manufacturer and supplier of LATERAL COCK available in 12mm , 16mm and 20mm. we are engaged in providing a quality array of lateral cock to esteemed customers- These lateral cocks are manufactured using high-grade raw material. The literal cock is use to connect two drip pipe and control the flow of water so that you can open and close of water flow.

Drip Accessories - LATERAL COCK

16mm Pepsi Joiner

we are able to put forth the best grade Pepsi Joiner. By making use of the exclusive quality material these products are manufactured keeping in mind the ongoing trends of the market. Pepsi joiner has a Lock Provision Special Cap provided to lock the thin wall thickness tube.

Drip Accessories , 16 MM PEPSI JOINER 1

16mm Pepsi Take Off

we are able to put forth the best grade Pepsi Take Off. By making use of the exclusive quality material these products are manufactured keeping in mind the ongoing trends of the market. Furthermore, after production, our quality inspectors examine these products so as to make sure their ability to meet the requests of customers.

Drip Accessories - 16 MM PEPSI TACK UP 1

16mm Pepsi End Cap

We providing a supreme quality gamut of Drip Pepsi End Cap are approved spectrum of 16mm Drip Pepsi End Cap. They are used to close the lateral ends; Submain ends or mainline ends with special cap for provided to lock the pipe.

Drip Accessories - 16-MM-PEPSI-END-CAP-1.jpg

16mm Pepsi Cock

We are one of the best manufacturer and supplier of LATERAL COCK available in 12mm , 16mm and 20mm. we are engaged in providing a quality array of lateral cock to esteemed customers- These lateral cocks are manufactured using high-grade raw material. The literal cock is use to connect two drip pipe and control the flow of water. Additional 16mm Pepsi Cock have lock provision special cap provided to lock the drip pipe.
Drip Accessories - 16 MM PEPSI COCK 1

Drip Punch pin, Dripper Punches / S PUNCH

We are instrumental in offering an excellent quality of dripper punch and S punch. The mainly usage of drip punch pin/ S Punch is to make a hole of same diameter of Dripper / Emitter. If you want a leak-proof installation and perfect hole for your Dripper / Emitter use punch pin for, make hole.
Drip Accessories, drip punch pin

Drill Bit

The drill bit is made up of stainless steel material. This is used to drill the PVC pipe so that grommets fixed for take off connector. Designed for easy and comfortable handling. Our all Drill bit make a hole size of 12mm, 16mm, 19mm and you put a same diameter of grommet in PVC pipe and your connection is done.
Drip Accessories, dril bit
Scroll to Top
Payal Irrigation